Free-Utils

UPSC signature resizer

Pick file or take photo

Sent from this page while it was open: 0 B.

Analytics use a few hundred bytes; an uploaded file would show its full size here.

Check it yourself

UPSC handles signatures differently from almost every other exam body in India. Instead of one signature in a narrow strip, it asks for three, written one below the other on plain white paper in black ink, and scanned together as a single image. That file must be a JPG named signature, between 20 KB and 100 KB, with a size of 350 to 500 pixels.

Three signatures make a taller, squarer picture than a usual signature crop, which is why a tool built for a 140 × 60 strip does not help. Here the crop is free, so you can draw it around all three signatures with a small margin. When you save, the tool resizes the whole crop so both sides fall between 350 and 500 pixels without cutting anything off, adding white bands when the crop is much wider or taller than a square. It turns any transparency white, writes a JPEG between 20 KB and 100 KB, and names it signature.jpg.

The tool never creates or repeats signatures; each of the three has to be yours, signed by hand. The scan is processed in your browser and does not leave your device.

Common mistakes with the UPSC signature

  • Only one signature is uploaded instead of three, one below the other.
  • One signature is copied and pasted three times on a computer instead of signing three times.
  • The signatures are on lined or coloured paper, or in blue ink rather than black.
  • The file is not named signature, or it is a PNG or PDF rather than a JPG.

Signing and scanning

  • Leave a little gap between the three signatures so they do not overlap.
  • Keep all three the same size and style, the way you normally sign.
  • Place the paper on a flat, well-lit surface and photograph it from straight above.
  • Crop close around the three signatures; large blank margins make the ink look faint after resizing.

Not a UPSC form?

Most other exams want a single signature. SSC asks for about 6.0 × 2.0 cm, IBPS for 140 × 60 pixels, and railway forms for at least 140 × 60 pixels at 30 KB to 49 KB. Use their own pages for those. For the UPSC photo, use the UPSC photo page, which saves photo.jpg.

FAQ

What does UPSC want for the signature?

UPSC's instructions for uploading the photo and signature, read on 20 November 2026, ask you to sign three times, one below the other, in black ink on plain white paper, and to scan all three as one image named signature: JPG, 20 KB to 100 KB, 350 to 500 pixels. UPSC can revise this, and its portal decides.

Does the tool write the three signatures for me?

No, and it never copies one signature three times. You sign three separate times on paper yourself. The tool only crops, resizes and compresses your scan of that sheet.

What does 350 to 500 pixels mean here?

The tool keeps the whole crop in view and resizes it so both sides fall between 350 and 500 pixels, scaling a large scan down or a small one up. When the crop is much wider or taller than a square, white bands fill the space left over, so draw it close around the three signatures to keep the ink large. Then it saves a JPEG between 20 KB and 100 KB.

Why must the file be called signature?

UPSC's instructions name the file. The tool saves it as signature.jpg, so you can upload it as it is.

Can I sign in blue ink?

UPSC asks for black ink on plain white paper. A blue signature or lined notebook paper is best redone before you scan.

Does my signature get uploaded to this site?

No. Everything runs in your browser and the sheet is never sent anywhere. The page is free, with no sign-up.

Related tools

More Image tools

  • RRB signature

    Get your running-hand signature into the JPG railway recruitment forms take: at least 140 × 60 pixels, 100 DPI, and a file size from 30 KB to 49 KB.

  • IIT JAM photo

    Crop a clear colour photo to the 3:4 shape of JAM's pixel limits and save a JPEG from 240 × 320 up to 480 × 640 pixels, between 50 kB and 200 kB.

  • IBPS declaration

    Crop a photo of your handwritten declaration to the wide 800 × 400 pixel shape IBPS asks for and save it as a JPEG between 50 KB and 100 KB.

  • IIT JAM signature

    Sign inside a 7 cm by 2 cm box, scan it, and save the wide JPEG the JAM form takes: 280 × 80 up to 560 × 160 pixels, 50 kB to 150 kB.

  • IBPS thumb impression

    Scan or photograph your inked left thumb, crop it square, and save the 240 × 240 pixel JPEG of 20 KB to 50 KB that the IBPS form takes.

  • Photo resizer in cm and KB

    Type the width and height in centimetres, the DPI and the KB range your notice gives. Drag the frame over your face, and the photo is saved to match. It never leaves your device.

  • IBPS signature

    Fit your scanned signature into the small 140 × 60 pixel strip IBPS prefers, as a JPEG between 10 KB and 20 KB, without sending it anywhere.

Sign in

Use Google, Apple, or email. No account is needed to download. Sign in for the larger phone limit, one free server job a month, or Pro.