Free-Utils

IIT JAM signature resizer

Pick file or take photo

Sent from this page while it was open: 0 B.

Analytics use a few hundred bytes; an uploaded file would show its full size here.

Check it yourself

JAM asks for the signature to be made inside a drawn box, 7 cm wide and 2 cm high, and then cropped to that box. That makes the file long and narrow, with a width three and a half times its height. The final JPEG must be at least 280 × 80 pixels and no more than 560 × 160, and between 50 kB and 150 kB, which is a larger file than most exam signatures.

Draw the box with a ruler and sign so the ink spreads across most of it, in black or dark blue, using your normal signature. Then take a straight photo or scan, and open it here. The crop frame is locked to the same 7 by 2 proportion, so you only need to line it up with the box's edges. On saving, the tool keeps the width between 280 and 560 pixels, sets the height to match, turns any transparency white, and brings the JPEG between 50 kB and 150 kB, padding it with blank metadata if a clean signature saves too light.

No file leaves your device. The crop, the resize and the save all run in your browser.

Why JAM signatures get flagged

  • The scan was not cropped to the box, so the shape is not 7 by 2.
  • The file is under the 50 kB minimum, common with a small, clean signature.
  • Only initials are used, or the signature is all in capital letters.
  • The ink is a light colour, or the picture is larger than 560 × 160 pixels.

Tips for the JAM signature

  • Measure the box carefully: 7 cm across and 2 cm down, with a thin, dark outline.
  • Sign large enough to fill the box from side to side without touching its lines.
  • Photograph from directly above so the box stays rectangular in the picture.
  • Crop to the inside edge of the box, so the outline itself does not show.

Other signatures

For the JAM photo use the IIT JAM photo page. UPSC wants three signatures on one sheet, and SSC, IBPS and railway forms each use their own size and KB range, so use those pages for their forms.

FAQ

What does JAM ask for in the signature?

The JAM 2027 Documents Requirements page, read on 20 November 2026, says to sign inside a box 2 cm high and 7 cm wide in black or dark blue ink, not in all capitals or initials, then scan it, crop it to the box, and save a JPEG or JPG of 280 × 80 pixels minimum to 560 × 160 pixels maximum, between 50 kB and 150 kB. The page can change, and the JAM portal decides.

How does the crop work?

The frame is locked to the 7 by 2 shape of the box. Fit it to the edges of the box you drew. The saved width is kept between 280 and 560 pixels, and the height follows the shape, from 80 to 160 pixels.

Why is my signature file too small?

A signature is mostly white space, and a JPEG of it can be well under the 50 kB JAM minimum. The tool pads such a file with blank metadata until it reaches 50 kB, without touching the signature.

Can I sign with my initials?

No. JAM does not accept a signature that is only initials or written entirely in capital letters. Use your full usual signature.

Is blue ink allowed?

Dark blue is allowed, as is black. Light blue or coloured gel pens often scan too faint, so pick a dark pen.

Where does the processing happen?

In your browser. The signature is not sent to any server, and the page costs nothing.

Related tools

More Image tools

  • Photo resizer in cm and KB

    Type the width and height in centimetres, the DPI and the KB range your notice gives. Drag the frame over your face, and the photo is saved to match. It never leaves your device.

  • Image to 300 DPI

    Write 300 DPI into a JPG or PNG and, when you give a print size, save the pixels that size needs. The picture is processed in your browser and not uploaded.

  • RRB signature

    Get your running-hand signature into the JPG railway recruitment forms take: at least 140 × 60 pixels, 100 DPI, and a file size from 30 KB to 49 KB.

  • Resize to exact pixels

    Type the width and height in pixels, drag a frame of that shape over the part you want, and save. Nothing is stretched, and the picture stays on your device.

  • US visa photo

    Make both versions a US visa application can ask for: a square digital JPEG for the online form and a 2 × 2 inch print file at 300 DPI for the interview. Your photo is cropped and resized in the browser and never uploaded.

  • UPSC photo

    Crop your photo so your face fills most of the frame, then save the colour JPG named photo that UPSC online forms ask for, between 20 KB and 200 KB.

Sign in

Use Google, Apple, or email. No account is needed to download. Sign in for the larger phone limit, one free server job a month, or Pro.