RRB signature resizer
Pick file or take photo
Sent from this page while it was open: 0 B.
Analytics use a few hundred bytes; an uploaded file would show its full size here.
Check it yourself
Railway Recruitment Board applications ask candidates for very little in the way of files. The photo is taken live during the form, so the one image you prepare is your signature. For CEN 07/2026, the NTPC Under Graduate notice, that means a JPG or JPEG between 30 KB and 49 KB, at least 140 pixels wide and 60 high, scanned at no less than 100 DPI.
The notice is specific about the handwriting: black ink on white paper, in running hand rather than block letters, and placed in the middle of a 35 mm × 20 mm box. Sign inside a box of that size so the proportions come out right, then photograph or scan it. Open the picture here and drag the crop around the box. RRB gives a minimum size rather than an exact one, so the crop has no fixed shape and the tool keeps all of it, enlarging only when it is under 140 × 60. It stamps 100 DPI into the file and settles the JPEG between 30 KB and 49 KB.
If you claim a free travel pass as an SC or ST candidate, the certificate is a separate PDF that must be under 400 KB; compress it with Compress PDF. Every file here is handled on your own device and none of it is uploaded.
Typical railway signature errors
- The file is under 30 KB, which happens often with a clean, compressed signature.
- It is over 49 KB because a full-resolution phone photo was uploaded.
- The name is written in capital letters, which the notice rules out.
- A photo is put in the signature slot, or the signature is off-centre with lots of empty paper.
Tips for the RRB signature
- Draw a 35 mm by 20 mm box with a ruler and sign in the middle of it.
- Use a black pen with a steady line; avoid sketch pens that bleed into the paper.
- Scan at 100 DPI or higher if you use a scanner; a phone photo works too if it is sharp and straight.
- Keep a copy of the saved file in case the portal asks you to upload it again.
Other railway files and other exams
Only CEN 07/2026 was read for this page, so check your own CEN before relying on these numbers. For the live photo there is nothing to prepare. For SSC or IBPS signatures, use their pages, which follow a different size rule.
FAQ
What signature does RRB ask for?
RRB CEN No. 07/2026 (NTPC Under Graduate), opened on 15 October 2026, paras 14.4 and 14.5, read on 20 November 2026, asks for a signature in black ink on white paper, in running handwriting, scanned at 100 DPI or more, as a JPG or JPEG of 30 KB to 49 KB, at least 140 × 60 pixels, centred in a 35 mm × 20 mm box. Other CENs may differ, and the RRB portal decides.
Why is the KB range so narrow?
Between 30 KB and 49 KB leaves little room, and a plain signature often compresses below 30 KB. The tool aims inside the range, and if the JPEG is still too light it pads the file with blank metadata until it passes 30 KB, without changing the picture.
What does the tool do with the size?
It keeps your whole crop, with no fixed shape, and only enlarges it if it is smaller than 140 × 60 pixels. It writes 100 DPI into the JPEG, the minimum the notice asks for, and flattens transparency onto white.
Where is the railway photo?
RRB captures the photo live by webcam or phone front camera, on a pure plain white background, with the camera at eye level. You do not upload an existing photo, and this tool does not take the live one. Bring a colour passport photo no older than two months to the CBT, document verification and medical.
Can I sign in capital letters?
No. The notice asks for running handwriting, not block or capital letters.
Is my signature sent anywhere?
No. The crop and the JPEG are made by your browser, and the file is never uploaded to a server. There is nothing to pay.
Related tools
More Image tools
- IIT JAM photo
Crop a clear colour photo to the 3:4 shape of JAM's pixel limits and save a JPEG from 240 × 320 up to 480 × 640 pixels, between 50 kB and 200 kB.
- UPSC signature
Scan the three signatures UPSC asks for, written one below the other, and save the sheet as signature.jpg between 20 KB and 100 KB and 350 to 500 pixels.
- IIT JAM signature
Sign inside a 7 cm by 2 cm box, scan it, and save the wide JPEG the JAM form takes: 280 × 80 up to 560 × 160 pixels, 50 kB to 150 kB.
- UPSC photo
Crop your photo so your face fills most of the frame, then save the colour JPG named photo that UPSC online forms ask for, between 20 KB and 200 KB.
- Photo resizer in cm and KB
Type the width and height in centimetres, the DPI and the KB range your notice gives. Drag the frame over your face, and the photo is saved to match. It never leaves your device.
- IBPS declaration
Crop a photo of your handwritten declaration to the wide 800 × 400 pixel shape IBPS asks for and save it as a JPEG between 50 KB and 100 KB.
- Image to 300 DPI
Write 300 DPI into a JPG or PNG and, when you give a print size, save the pixels that size needs. The picture is processed in your browser and not uploaded.
- IBPS thumb impression
Scan or photograph your inked left thumb, crop it square, and save the 240 × 240 pixel JPEG of 20 KB to 50 KB that the IBPS form takes.